Local Trapper Profile – Mike Midkiff

Published by Administrator

Today we will be featuring one our our local trappers Mike Midkiff. Mike has over 30 years experience trapping in south Alabama. After taking a break for a few years he has gotten back into trapping with the fur market at all time highs. Mike has a full time job so he generally runs a line close to home so he can get up early and check the line before work and at night does all his work in the fur shed.

Mike has been running his line for 3 weeks and I have posted his results below. Majority of the sets he has used has been dirt hole sets.

22 – Raccoons
11 – Opossums
5 – Skunks
2 – Grey Fox
1 – Coyote

Baits and Lures Used:
Coon Catcher
Jack Mackerel
Black Magik Crayfish Bait
Predator Supreme Bait
K-9 Call Lure
Grey Fox 102
Canine Select
Coyote Urine
Otter Lure Supreme

Traps Used:
Duke 1.5 Coil Spring Foot Trap
Duke 1.75 Coil Spring Foot Trap

How To Dye Your Traps With Logwood Dye

Published by Administrator

We get many questions about how to dye your traps and have put together this article and video in hopes that it will answer any questions you might have. In this video we used two different methods of dyeing traps. We used the Cold Dye method and the Traditional Dye method using boiling water. Both methods work well it just depends and whichever you prefer. Here are the steps you will need to take to dye your traps:

How To Dye Traps

1. You will need to wash your traps with a degreaser of some type or lye to remove all the oil and grease that is on the trap out of the box. If you are using rusty traps then take a steel wire brush to them very lightly.

2. Take your traps outside and leave them exposed for a week or two to get a light coat of rust on them. If they are not rusting fast enough you can spray them with vinegar to speed up the process.

3. Before dipping traps in dye solution make sure you put a nail or stick in between the jaws to hold them open.

4. Cold Dye Method: Take your trap dye and mix with water in a bucket or container of some type. Put your traps in the container and leave for a few days. Once the desired color is obtained remove your traps and hang to dry. The benefit of this method is that you do not have to build a fire and watch it for an hour.

4. Traditional Method: Add your dye ( 1 Pack per 6 gallons of water) to your container. Bring your water to a rolling boil. Make sure you have a heat brick/stone on the bottom of the container so that the traps do not rest on the bottom. Let water temperature come down to a simmer and then put your traps in. Make sure you have a wire attached to make it easier to remove.  Allow traps to seat for 30 mins to 1 hour. I would check them until you get the desired color.

5. Once desired color is obtained simply remove your traps and hang them up to dry.

Note: Dying traps helps seal the trap so you do not have to deal with rust in the future. As with any piece of equipment if you want to keep it for an extended period of time and have it work properly then you do not need it to be rusty. Rust will slow your traps down and they will not last as long.

Next Video: How to Wax Your Traps.

Logwood Trap Dye Powder

Logwood Trap Dye Liquid

Trap Wax

16″ Trappers Packbasket With Harness

Published by Administrator

Here is a really nice wooden packbasket that works really well for a young trappper. We do recommend it for youth since is it only 16″. Works ok for an adult but you might want to go up to a 20″. Really great Christmas Gift Idea !!

These Wooden Packbaskets are crafted from top quality hard woods. They have built-in floors and come with adjustable harnesses and web handles.

The 16″ Packbasket is 16″ high and has a top opening of 12″ x 10″. This packbasket is ideal for youth trappers.

The 20″ Packbasket is 20″ high and has a top opening of 14″ x 10 1/2″. This is the most common size packbasket used by adults.

16″ Packbasket For Youth $38.50
20″ Packbasket for Adult $49.50